Jet Nozzles Set IPX5 & IPX6
The Jet Nozzle Set IPX5 IPX6 - aluminum & composite version follows the Norm IEC 60529 Fig.6. It comes with two sizes of nozzle: diameter 6,3mm and 12,5 mm.
Jet Nozzle Set IPX5 IPX6 set - Aluminum & Composite
The Jet Nozzles Set IPX5 & IPX6 tester follows the Norm IEC 60529 Fig.6. It comes with two sizes of nozzle: diameter 6,3mm and 12,5 mm.
This product performs the test using IPX5 & 6 method with the nozzles jetting the sample from all practicable direction with adequated pressure and flow of water, as specifies the Norm. In fact, the flow to achieve the correct delivery rate will be 12,5 L/min +/-5% for IPX5 and 100L/min +/-5% for IPX6 and should be constant during the test. On the other hand, the distance from nozzle to the sample surface should be between 2,5m and 3m. On the whole the minimum test duration is 3 minutes.
Dunel Jet Nozzle complies with ANSI, CSA, UL, IEC, EN, VDE and CE requirements. Equaly importante to add that it’s available with ISO 17025 traceable certificate of calibration under resquest.
- Two nozzles diameter of 6,3mm and 12,5 mm
- Engineering plastic handle with ball valve
- Connection to the hose
- Pressure Gauge
- Certificate of calibration available upon request
Accessories upon request:
In addition to perform IPX5, we recommend our DNFM35L Flowmeter. For IPX6 our DNFM125L Flowmeter.