DNTT3024-200 is the heavy-duty turntable solution for carrying samples under IPX1, IPX2, IPX3 and IPX4 when performing waterproof tests. The equipment results from years of experience in compliance tests performed by our engineers. This compliance tool has many innovations 
in hardware and software. It makes many possible integrations; for example, the software that manages the drip boxes IPX1 & IPX2 manifolds - controlling the water switches and test time - can be synchronized with the turntable servo motor. The turntable can run intermittently at 1RPM or move the sample when tilted in 4 positions of 90 degrees per turn, synchronized with the time of a test of the drip box equipment. The same can be integrated with IPX3 & IPX4 (method a).

Compliance
The compliance is related to articles 14.2.1, 14.2.2, 14.2.3 and 14.2.4 of the IEC 60529. They are also used in articles 14.2.5 and 14.2.6 for customers' directives and criteria. Some regulatory Standards make some additional requirements. E.g., use the samples energized during the IPX performance. It requires a particular device, the sealed rotary "power-bus," that makes it possible to supply the power to the samples while the table turns. 

Versions 

DNTT3024-200
• Table diameter: 800 mm
• Speed: 0 ~ 10 RPM
• Voltage: 45VDC
• Inclination: no
• Sample Power Source: no
• Profile Height: 280mm

DNTT3024-200/1
• Table diameter: 800 mm
• Speed: 0 ~ 10 RPM
• Voltage: 45VDC
• Inclination: 0 ~ 15 degrees 
• Sample Power Source: no
• Profile Height: 280mm

DNTT3024-200/3
• Table diameter: DNTT3024-200/3-8 
for 800 mm, or DNTT3024-200/4-10 
for 1000 mm
• Speed: 0 ~ 10 RPM
• Voltage: 45VDC
• Inclination: no
• Sample Power Source: Mono-phase
• Profile Height: 400mm

DNTTS3024-200/4
• Table diameter: DNTT3024-200/3-8 
for 800 mm, or DNTT3024-200/4-10 
for 1000 mm
• Speed: 0 ~ 10 RPM
• Voltage: 45VDC
• Inclination: 0 ~ 15 Degrees 
• Sample Power Source: Three-phase
• Profile Height: 400mm