top of page

PRODUCTS & SOLUTIONS

key663.165_edited.jpg

PRODUCTS

Name: Handled Sphere Probe

SKU: DNTP032-1-A

IEC61032 Fig 1 Probe A

Outfits

  • Ø50 mm sphere probe SS316 alloy

  • Stop face in Delrin® Ø 45mm x 4mm

  • Handle in Delrin® Ø 10mm x 100mm

  • Thread M6 to connect force Gauge

--------------------------------------------

Name: Jointed Finger Probe

SKU: DNTP032-2-B

IEC61032 Fig 2 Probe B

Outfits

  • Ø12mm finger parts in SS316 alloy

  • Hand in Delrin® Ø 50mm x 20mm x 100mm

  • Stop face in Delrin® Ø 75mm x 5mm

  • Handle in Delrin® Ø 20mm x 100mm

  • Thread M6 to connect force Gauge

  • Wire to connect contact check

--------------------------------------------

Name: Unjointed Finger Probe

SKU: DNTP032-7-11

IEC61032 Fig 7 Probe 11

Outfits

  • Ø12mm finger part in SS316 alloy

  • Stop face in Delrin® Ø 50mm x 5mm

  • Handle in Delrin® Ø 20mm x 100mm

  • Thread M6 to connect force Gauge

  • Wire to connect contact check

--------------------------------------------

Name: Small Finger Probe Ø5.6

SKU: DNTP032-13-19

IEC61032 Fig 13 Probe 19

Outfits

  • Ø5.6mm finger parts in SS316 alloy

  • 1st section of the arm in Delrin® Ø 25.9mm x 101.6mm

  • 2ndsection of the arm in Delrin® Ø 25.4mm x 464.3mm

  • Thread M6 to connect force Gauge

  • Wire to connect contact check

--------------------------------------------

Name: Small Finger Probe Ø8.6

SKU: DNTP032-12-18

IEC61032 Fig 12 Probe 18

Outfits

  • Ø5.6mm finger parts in SS316 alloy

  • 1st section of the arm in Delrin® Ø 38.4mm x 101.6mm

  • 2ndsection of the arm in Delrin® Ø 38.1mm x 451.6mm

  • Thread M6 to connect force Gauge

  • Wire to connect contact check

--------------------------------------------

Name: Test Pin Probe 15mm

SKU: DNTP032-9-13

IEC61032 Fig 9 Probe 13

Outfits

  • Ø4 ~ 3 mm pin probe in SS316 alloy

  • Stop face in Delrin® Ø 25mm x 4mm

  • Handle in Delrin® Ø 10mm x 20mm

  • Thread M6 to connect force Gauge

  • Wire to connect contact check

--------------------------------------------

Name: Test Pin Probe 50mm

SKU: DNTP032-8-12

IEC61032 Fig 8 Probe 12

Outfits

  • Ø4 mm pin probe in SS316 alloy

  • Stop face in Delrin® Ø 25mm x 4mm

  • Handle in Delrin® Ø 10mm x 20mm

  • Thread M6 to connect force Gauge

  • Wire to connect contact check

--------------------------------------------

Name: Wire Probe 1mm

SKU: DNTP032-4-D

IEC61032 Fig 4 Probe D

Outfits

  • Ø1 mm x 100mm wire probe in SS316 alloy

  • Stop face (ball) in Delrin® Ø 35mm

  • Handle in Delrin® Ø 10mm x 100mm

  • Thread M6 to connect force Gauge

  • Wire to connect contact check

--------------------------------------------

Name: Wire Probe 2.5mm

SKU: DNTP032-3-C

IEC61032 Fig 3 Probe C

Outfits

  • Ø2.5 mm x 100mm wire probe in SS316 alloy

  • Stop face (ball) in Delrin® Ø 35mm

  • Handle in Delrin® Ø 10mm x 100mm

  • Thread M6 to connect force Gauge

  • Wire to connect contact check

--------------------------------------------

Name: Test Probe 41

SKU: DNTP032-16-41

IEC61032 Fig 16 Probe 41

Outfits

  • Ø30 mm x 80mm (with conical tip) probe in SS316 alloy

  • Handle in Delrin® Ø 50mm x 80mm

  • Thread M6 to connect force Gauge

Name: Test Probe 1

SKU: DNTP032-5-1

IEC61032 Fig 5 Probe 1

Outfits

  • Ø50 mm (sphere) in SS316 alloy

  • Thread M6 to connect force Gauge or to hook

Name: Test Probe 1

SKU: DNTP032-6-2

IEC61032 Fig 6 Probe 2

Outfits

  • Ø12.5 mm (sphere) in SS316 alloy

  • Thread M6 to connect force Gauge or to hook

--------------------------------------------

Name: Cone Probe 31

SKU: DNTP032-14-31

IEC61032 Fig 14 Probe 31

Outfits

  • Ø25mm x 80mm rod part in SS316 alloy

  • Cone stop face in Delrin® Ø 60 ~ 110mm x 70mm

  • Handle in Delrin® Ø 20mm x 100mm

  • Thread M6 to connect force Gauge

Name: Rod Probe 32

SKU: DNTP032-15-32

IEC61032 Fig 15 Probe 32

Outfits

  • Ø25mm x 80mm rod part in SS316 alloy

  • Handle in Delrin® Ø 20mm x 100mm

  • Thread M6 to connect force Gauge

IEC60529

--------------------------------------------

Name: Drip Box Tester IPX1 IPX2

SKU: DNDB529-3

IEC60529 Article 14.2.1 / 14.2.2

Outfits

  • Ø 0.4 micro-nozzle M5 thread

  • Nozzles Spacing 20 x 20

  • IPX1 Rain density p/ ¼ sq. meter 250ml

  • IPX2 Rain density p/ ¼ sq. meter 750ml

  • Manifold Dimension 500 x 500 x 20 (mm)

Other dimensions:

  • SKU: DNDB529-4 Drip Box Manifold 500 x 1000 x 20 (mm)

  • SKU: DNDB529-5 Drip Box Manifold 1000 x 1000 x 20 (mm)

  • SKU: DNDB529-6 Drip Box Manifold 1000 x 1500 x 20 (mm)

  • SKU: DNDB529-7 Drip Box Manifold 1000 x 2000 x 20 (mm)

  • SKU: DNDB529-8 Drip Box Manifold 2000 x 2000 x 20 (mm)

--------------------------------------------

Name: Handheld Spray Nozzle IPX3 IPX4

SKU: DNSN529-2

IEC60529 articles 14.2.3 b  / 14.2.4 b

Outfits

  • Head shower in hard-anodized aluminum (available in Brass CLA360 upon request)

  • Head Shower holes Ø0.5mm

  • Moving Shield in Carbon Fiber

  • Shower Body in hard-anodized aluminum

  • Full view Flow Meter 18LPM attached at the handle

  • Pressure Gauge integrated on shower body

  • Flow Valve attached on the handle

--------------------------------------------

Name: Jet Nozzle Set IPX5 IPX6

SKU: DNJN529-3

IEC60529 articles 14.2.5 / 14.2.6

Outfits

  • Interchangeable Nozzles IPX5 IPX6 in hard-anodized aluminum

  • IPX5 Nozzle Diameter 6.2 mm

  • IPX6 Nozzle Diameter 12.5 mm

  • Handle in Delrin® Ø38

  • Pressure Gauge integrated on the handle

  • Flow Valve attached on the handle

--------------------------------------------

Name: High-pressure tester IPX9 & IPX9K

SKU: DNX9-529-K

IEC 60529

Protection against pressurized water jet. High pressure and temperature water are jetted at an enclosure to test foreign ingress protection. IPX9 and IPX9K testing are the highest ingress protection water ratings currently available in the IP Code system.


Product Details:

  • Internal dimensions (mm): 1000*1200*1000 D*W*H

  • External dimensions (mm): 1260*1300*1760 D*W*H

  • Water Spray Temperature: ambient ~ 88ºC (Adjustable)

  • Water Spray Angle: 0°, 30°, 60°, 90°

  • Number of Spray Nozzles: Four

  • Spray Range: 30° ± 5° (Single hole)

  • Distance from water spraying to turntable: 10~15cm

  • Water Pressure: 8000-10000 Kpa (adjustable)

  • Water Flow Rate: 14L-16L/min

  • Turntable Speed: 5 ±1 r.p.m Turntable height: 200-450mm, adjustable

  • Turntable Diameter: R 300 Load: 40kg

  • Controller: PLC Control

  • Flowmeter: Ultrasonic

--------------------------------------------

Name: Load Bank

SKU Code: DNPL60884-1


Description


System for test on ”Equipment of control automatic or manual for electrical fixed installations worker to home appliance use or similar” according to standard.

Voltage selected by type of test

Breaking capacity = 275 V or

Normal operation = 250 V

Selectable current and Cosφ

10,16 or 20A

Cosφ:0,6 or 0,8

Continuous Service working.

The system can be planned into various solutions:

  1. Manual solution with selection loaded through switches

  2. Automatic solution with selection loaded through PLC

Components:

  • 1 pc. Load Bank rack  “Rittal® “

  • 1 pc. Apparatus for breaking capacity and normal operation test. (Dunel®)

Technical Specification:


  • Input voltage: 230 V 50Hz (Consult us for others tensions and frequencies)

  • Input current: 32 A

  • Auxiliary  input voltage: 230 V 50 Hz

  • Auxiliary  input current: 6 A


Load Bank Assembled in the rack “Rittal “

  • Externally from an aluminum panel with mounted the following things

  • Command of general switch block door

  • Push buttons of start, stop and of emergency and signalling “on test”

  • Dimension: App. 80X80X180 cm

  • Internally the structure and essentially uniform in 1 rack (box)

Breaking capacity specification (IEC 60884-1 Item 20)

Normal operation specification (IEC 60884-1 Item 21)

Ask for more details info@dunel.com

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

--------------------------------------------

Name: Glow Wire Tester

SKU: DNGW695-1

IEC 60695-2-10,11,1213 – IEC 60950-1 – IEC 60335-1 – IEC 60884-1 – IEC 60238 – IEC 60745-1 – IEC 60400 – IEC 60730-1 – IEC 60598-1 – IEC 61050 – IEC 60320-1 – IEC 61058-1 – IEC 60742 – IEC 60669-1 – UL 746A – BS EN 60695-2-1 – IEC60884 – BS 6458 – NF C20 -921-1 – IS:11000.

SPECIFICATIONS

  • Glow Wire Tester Element: Ni/Cr8020 wire, ø4mm

  • Temperature Range: 50ºC ~1050ºC

  • Current Range: 0 to 170 A

  • Thermocouple Diameter: ø 0.5 mm

  • Thermocouple: Type K (Ni/Cr X Ni/Al)

  • Temperature Accuracy: 1ºC

  • Sample Travel: Horizontal

  • Contact Force: 1 N

  • Travel Distance: 24 cm/s

  • Penetration Deep Limiter: 7 mm

  • Flame Height Indicator: 150 mm

  • Main Supply: 120 Vac 50/60 Hz 6.5A (220V also available)


Weight: 48 Kg
Dimensions: W: 1100 D: 950 H: 950 (mm)
Current meter: True RMS, ±0.1% (accuracy)
Temperature meter: ±0.5% (accuracy)
Chamber Lux: Less than 20Lux (inside without auxiliary illumination, the door closed)

Compliance:

  • EN60695-2-10 General GW test methods

  • EN60695-2-11 Test procedures for injected products on the final form

  • EN60695-2-12 Glow-wire flammability index GWFI (method)

  • EN60695-2-13 Glow-wire ignition temperature GWIT (method)

  • Versions

DNGW695/1

Glow Wire Tester Standard Equipment to perform IEC 60695-2-10,11 requirements

DNGW695/2

Glow Wire Tester Semi-Automatic Equipment to perform IEC 60695-2-10,11 requirements

DNGW695/3

Glow Wire Tester Automatic to perform IEC 60695-2-10,11,12,13 requirements

DNGW695/4

Glow Wire Tester Automatic Equipment with data acquisition interface, printer output and monitoring flame sensors, to perform IEC 60695-2-10,11,12,13 requirements

GET A QUOTE

This is your Price Quote section paragraph. Encourage your site visitors to provide their information, in order to get a quote in return.

Thanks for submitting!

bottom of page